IPD 12000E Broadband Loop Carrier (BLC)
IPD12000E
Video Ready, High-capacity Ethernet-based Modular Multi-Service
Broadband Loop Carrier for large scale Central Office DSL
deployments
ꢀ DSL the Easy Way™
provides true 'Plug &
Play', loop-bonded
operation with no
configuration required
ꢀ High density system with
12 line card slots (up to
576 lines / chassis or 1,152
lines per 7' rack)
Zhone's IPD12000E Broadband Loop Carrier (BLC) provides a high capacity, native IP Ethernet
platform for the feature rich multi-service access multiplexer modules in the IPD family.
ꢀ High bandwidth, full
duplex 16-GigE uplink and
24-GigE backplane
capacities
The IPD12000E is engineered for efficient, high-speed IP data transport in a compact, fault-tolerant
chassis. Supporting high-density Active Ethernet, ADSL2+, SHDSL, extended-rate SHDSL.bis, and
T1/E1 access modules, the Ethernet-based IPD12000E is the optimal line aggregation platform for
today's advanced IP-based access networks. Incumbents, Competitive Operators, and Internet Service
Providers are able to cost-effectively offer the full range of today's advanced IP-based services, such as
high-speed broadband Internet and IP video. Most importantly, these services can be delivered over a
pure IP network without a dependency on ATM.
ꢀ Choice of T1, E1, ADSL2+,
SHDSL/SHDSL.bis, and
Active Ethernet,
The IPD12000E features a high capacity backplane, delivering up to 2 Gbps throughput to each of the
12 access slots, and up to 16 Gbps upstream from a pair of Broadband Services Switch 8000 uplink
cards. Dual 50-pin, RJ-21 connectors are provided for every slot so that the chassis can support higher
port density modules in any access slot. High port density modules include a 48-port ADSL2+, a
48-port SHDSL.bis, and 24-port, 4-wire T1 and E1 modules. For mission-critical, high speed data
applications, the IPD12000E offers survivable network topologies by means of Ethernet Automatic
Protection Switching (EAPS) rings and BSX8000 uplink card-level redundancy options.
hot-swappable, access
modules
ꢀ Supports T1/E1 and
SHDSL/SHDSL.bis loop
bonding for high-capacity,
symmetric business-class
services
Managing all of these high-speed services could not be simpler with the availability of a full range of
local and remote management options, including an integrated Web GUI, SNMP, and Command Line
Interface (CLI). All of the Access Modules offer simple, 'Plug & Play' operation, with the system
configuring each port automatically and without intervention. When more sophisticated bandwidth
management functionality is desired, the IPD supports Zhone's complete Multi-media Traffic
Management (MTM) feature set, giving system operators the ability to prioritize traffic based on DSCP,
IP address ranges, MAC address ranges, and VLAN ranges. Rate limiting features and 802.1p priority
also ensure that specific applications are given appropriate priority and bandwidth allocation
throughout the system, while marking packets for appropriate VLAN and QoS management by
upstream network devices.
ꢀ Survivable network
topology options based
on RFC3619 EAPS rings
and uplink card
redundancy
The IPD12000E supports up to two BSX8000-5 (Broadband Switch Modules ) uplink cards, each
operating in simplex mode or a pair of BSX8000-5R cards operating in redundant mode. Each BSX8000
switch card supports four (4) Gigabit uplink ports, and has provisions for an optional MIM (Micro
Interface Module), allowing the IPD to integrate easily into a variety of network designs. A variety of
MIM types are available, including: 10/100 Ethernet; 100 Mbps fiber; 2 x T1/E1; 4 x T1/E1; and either
2- or 4- Gigabit Ethernet ports using either copper or fiber Small Form Factor Pluggable modules.
ꢀ Metro Ethernet Forum
(MEF 9/14) Certified for
EVPL and E-LAN Services
For installation flexibility, the IPD12000E is only 9-rack units high, and has removable mounting
brackets that can be placed in increments of 1.45” up to 9.28” from the front of the chassis, allowing
for multiple installation options in either 19" or 23" equipment racks.
|